C&P S.r.l. as an “ASME Authorized Inspection Agency” provides its customers with a team of Authorized Inspectors to guarantee the highest quality, safety and compliance of pressure equipment intended to be installed in a nuclear power plant for power generation, ensuring that they meet the high technical and safety requirements established by the standard.

The ASME Code Section III is the oldest and most widely used Construction Code for nuclear components. It includes the design, construction, inspection, testing and certification requirements that are mandatory in the USA and Canada. C&P S.r.l. can guide you in the process of obtaining the “ASME Certificate of Authorization” and the “Certification Mark” of your interest. From the preparation and registration of the Application to the preparation of the Quality Assurance Manual, from the verification of the qualifications of the personnel involved, to the NDE procedures, from the support during the realization of the demonstration sample to the verification of welding procedures and of welders.

C&P S.r.l.’s inspectors and specialists have experience gained over years of work in the nuclear sector and have qualifications that guarantee the highest levels of competence. In addition, C&P S.r.l. can provide you with an ASME Nuclear inspection service that is not limited to meeting the requirements of the Code but is also support in the application and interpretation of the Code.

In order to be able to submit the application for certification, the manufacturer must:

  1. Define the scope of the activities which for you wish to apply for ASME Nuclear Certification, by consulting the certification programs defined on the website or by asking for support directly from C&P S.r.l. staff. The certifications and related “certification marks”, which differ in relation to the type of involvement and the type of product, are: N, NA, NPT, NS, N3;
  2. Contract with an ASME Authorized Inspection Agency (C&P S.r.l.);
  3. Prepare the Quality Assurance Manual and a Demo Item that will be used to demonstrate to an ASME Team the application of the quality assurance system required by the relevant ASME III.

The approximate time frame to obtain the Certification is six months (from the Application for Certification to the issuance of the Certificate).

In detail, the steps are:

  1. Submission of the certification application by the company requesting the certification;
  2. Review of the application by ASME and scheduling of the dates of the “ASME Survey”;
  1. Once the proposed dates have been accepted by the company, after 2÷3 months we move on to the “ASME Survey”, i.e. the audit by the ASME Team (composed by 3 members appointed by ASME and two appointed by the AIA) on the demo item, in which the “ASME + AIA” Team verifies the Manual and its implementation;
  1. The ASME Conformity Assessment Department, on the basis of its assessments and the recommendation issued by the Team that conducted the Survey, will issue or not (approximate time required: 2 months) the required Authorization Certificate and will send the “ASME Certification Mark” to the manufacturer.

Other Ispections

Material inspections and certification according to en 10204 type 3.2

C&P provides inspection and certification services of metallic materials to forges, foundries, rolling mills

Voluntary inspections under accreditation

C&P is an ISO 17020 type A accredited inspection body for the inspection of pressure equipment, steam generators and piping on a voluntary basis.

MOM Singapore inspections

C&P, with its ISO 17020 accreditation, specific to pressure equipment, boilers and piping complies with the requirement of Workplace Safety and Health Act (WSH) and is able to provide the certification required for the export of these products destined for Singapore.

Australia Inspections

C&P is an ISO 17020:2012 accredited Inspection Body that includes the Australian manufacturing code AS 1210 and is therefore authorized to conduct inspections for the Australian market.

New Zeland Inspections

C&P is able to provide you with the necessary support for the export of your pressure equipment to New Zealand.

Accredited third party inspections

Inspection of pressure equipment under accreditation refers to a process of verification and evaluation of pressure equipment by accredited bodies.

DOSH Malaysia Inspections

C&P, as a DOSH approved Inspection Body, provides inspection service for exporting your products to Malaysia.

ASME Inspections

C&P as an Authorized Inspection Agency in addition to the inspection service provides its customers with support in the application and interpretation of the Code.